HMGP 105D series

HMGP 105D series

Thương hiệu: 
Giá bán:  Liên hệ
Feature A product identical in shape to HMGP-105, but with the control box made out of die casting AL to ensure superior durability and resistance against external impacts. The main parts of the pump are integrated to ensure easy repairs and maintenance. Internal control type(HMGP-105D) and External control type(HMGP-105DC, 105W) can be used.

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-105D HMGP-105DC HMGP-105W
PUMP TYPE GEAR PUMP
DISCHARGE PRESSURE 8kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 2Liter
DISCHARGE AMOUNT 3~30 / 4~80cc 100cc/min
INTERVAL TIME 3~30 / 300~120min External control
FLOAT S/W Contact type A contact (NO)
ON at Low level
PRESSURE S/W - Contact type A contact(NO)
- Operation pressure 1.5 ± 0.2 bar ON
MOTOR SPEC
INPUT 50W
PHASE 1Ø
VOLTAGE 110V   |   200V   |   220V
CURRENT 1.40A/0.95A   |   0.60A   |   0.75A/0.50A
FREQUENCY 50/60Hz
PACKING SPEC
PACKING SIZE(cm) 15(W) x 18(L) x 26(D)
WEIGHT(kg) PUMP 2.9
PACKING 2.3

Operating Guide

  • The pump operates once power is connected and electricity is supplied. You can set the pause time using the Interval ① on the front of the pump, and discharge ② to set the operating time (seconds). Afterwards, the pump will repeatedly operate and pause
  • Minimum pause time of the pump is 3 minutes, and the discharge time can be set to 30c (HMGP-105D)
  • When operating the pump, the DIS, lamp ③ switches on, and during the pause, the INT, lamp ④ switches on
  • he MAN ⑤ button can be used for test operations and to let air out from the pipes. (But, do not operate more than 5 minutes, as it can cause motor damage.)
  • The pump is set at 8kg/cm' when released from the factory, but this may differ depending on the changes in the viscosities of the oils used (ail viscosity, surrounding temperature).